This activity means that in this case the measuring device become the subject of the test. So as to able to measure satisfactorily, need to know the performance of our measuring devices. Since this service reveals the failures and errors of the instrument in documented form, helps to handle this issue.
The user will receive a certificate about his measuring device, holding this then will easily be able to decide which measurement task can be done with it, and moreover he must also decide when need to re-calibrate it. Most of our costomers are those, who are operating in certified quality system, because this service is closely integrated into their systems. The certification of the National Accreditation Board shows unambiguously the proper quality of our calibration services.
Measuring tape, measuring rule
Values measured with standard or reproduced, and measuring range:
- Measuring tape: 0-50 m
- Measuring rule: 0-3 m
- Resolution of the calibration standard: 0.01 mm
Caliper gauge, depth gauge
Values measured with standard or reproduced, and measuring range:
- 0-1000 mm
- Precision class of the calibration standard: 1
Height gauge
Values measured with standard or reproduced, and measuring range:
- 0-1000 mm
- Precision class of the calibration standard: 1
Dial gauge, touch point indicator 3D
Values measured with standard or reproduced, and measuring range:
- Digital, analogue: 0…50 / 0.001 mm
- Resolution of the calibration standard: 0.0005 mm
External and depth micrometer
Values measured with standard or reproduced, and measuring range:
- 0…525 mm
- Precision class of the calibration standard: 0.1
Angle gauge
Values measured with standard or reproduced, and measuring range:
- 0 – 360˚
Bubble-level (bricklayers type)
Values measured with standard or reproduced, and measuring range:
- Bubble-level (bricklayers type): to 1 m frame length
- Sensitivity of the calibration standard: 0.001 mm/m
Hand-level (engineers type)
Values measured with standard or reproduced, and measuring range:
- Hand-level (engineers type): 0, 1; 0.02 mm/m
- Sensitivity of the calibration standard: 0.001 mm/m
Feeler gauge, layer-thickness standards
Values measured with standard or reproduced, and measuring range:
- 0 … 5 mm
- Resolution of the calibration standard: 0.001 mm
Clamp thickness gauge
Values measured with standard or reproduced, and measuring range:
- 0 … 100 mm
- Resolution of the calibration standard: 0.01 mm
Ultrasonic thickness gauge
Values measured with standard or reproduced, and measuring range:
- 0 … 100 mm
- Resolution of the calibration standard: 0.01 mm
Layer-thickness gauge
Values measured with standard or reproduced, and measuring range:
- 0 … 100 mm
- Resolution of the calibration standard: 0.01 mm
Comments are closed.